Hand Dryers

HK-2400-SAR Auto Nozzle Recessed Hand Dryer ×
  • HK-2400-SAR Auto Nozzle Recessed Hand Dryer
  • HK-2400-SAR Specifications
Add to my products
Product Enquiry

Product Enquiry

Please call Metlam or use product enquiry form if you need more infromation.

Metlam Customer Service / Head Office: 1300 METLAM (638 526)

State & Territory Contacts

Business Development Manager: Rachael Williams, 0407 863 730

Senior Business Development Manager: Kurt Rose , 0429 163 961 


Business Development Manager: Belinda Owens, 0407 484 355

SA / WA / NT

Regional Sales Manager - Central & Western Australia : Adam Seabrooke,
0407 553 045

Metlam Australia Customer Service Team
sales@metlam.com.au or 1300 METLAM (638 526)

From Outside Australia

Metlam Head Office: +61 3 5420 8800



Auto Nozzle Recess Hand Dryer

Facia Panel
1.2mm #304 Satin Stainless Steel
2.0mm #304 Satin Stainless Steel
Chrome Plated Zinc
Motor 200W Brush Type: Dual Ball Bearings, 5500RPM
105°C auto reset safety overload
Power Use 240V, 50Hz, 2000-2400W, 10.0A
Sound Level 73db (+/- 3)
Drying Time Less than 30 seconds
DP Rating IPX 1
Element 1800-2200W
Heater 65°C auto reset thermostat
Warm Air Speed: 28m/s
  Temp: Ambient +30°C
Protection Over Heating Fuse (replaceable)
Timing 60 sec power cut off, auto reset
Sensor/Range Auto Infrared - 180mm +/- 20mm preset, 100 - 300mm adjust
Case Security 4 SS theft resistant hex drive screws (hex key supplied)
Net Weight 9kg
Unit Size
Wall Opening
320mmW x 338mmH x 178mmD
295mmW x 313mmH x 175mmD
80mm projection
Warranty 1 year 
Note  * This unit is accessible compliant when installed in accordance with AS1428.1. guidelines.
Suitable Applications
  • commercial-industrial-facilities.png
  • residential-facilities.png
  • educational-facilities.png
  • health-aged-care-research-facilities.png
  • public-facilities.png
  • disabled-access.png
  • hospitality-leisure-facilities.png


The photographs and line drawings of the products presented above are representational only. Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.